Product Search
Search Results
Compare:
AP-TSS10, AP-LT10
High current (32 A), high temperature (125 °C) Spacer/Power Terminal, PCB SMT Terminal, easily operate with SMT and M3 (8.00 mm) screws
AP-10
High-power supply terminal, high heat resistance board-to-board connection. Contribute to miniaturization of power electronics devices, height differences can be customized.
LIGHTPASS®-EOB 100G
100 G（25 Gbps x 4 ch） Bi-directional, Low profile, MPU integrated, Low power consumption, photoelectric conversion module
LIGHTPASS®-EOM 100G
100Gbps（25Gbps x 4ch） Bi-directional, High Density, Low power, mid-board optical module
MHF® 7S
Excellent EMC performance with fully-shielded design, ideal for 5G mmWave applications, VSWR 1.5 max at 15 GHz in small 2.0 x 2.0 mm footprint
- Micro-coaxial Cable (AWG): #32 (1.13)
- Frequency Range: Up to 15 GHz
- Mated Height (mm): 1.400 Max.
MHF® I
Supports up to 9 GHz, mated height of 2.5 mm max. and 3.0 mm max.
- Micro-coaxial Cable (AWG): #30 (1.80) #30 (1.37) #32 (1.32) #32 (1.13) #36 (0.81)
- Frequency Range: Up to 9 GHz
- Mated Height (mm): 2.500 Max. , 3.000 Max.
MHF® I LK
Locking solution that works with MHF I receptacles, supports up to 9 GHz, mated height of 2.9 mm max
- Micro-coaxial Cable (AWG): #30 (1.80) #30 (1.37) #32 (1.32) #32 (1.13) #36 (0.81)
- Frequency Range: Up to 9 GHz
- Mated Height (mm): 2.900 Max.
MHF® I (4 pads receptacle)
MHF® I receptacle with additional 4th pad improves center alignment when mounted on the board by reflow, and increases solder shear force
- Frequency Range: Up to 9 GHz
- Mated Height (mm): 2.500 Max. , 3.000 Max.
MHF® 4
Low-profile design (mated height : 1.2 mm max.), ideal for use in limited spaces
- Micro-coaxial Cable (AWG): #36 (0.81)
- Frequency Range: Up to 9 GHz
- Mated Height (mm): 1.200 Max.
MHF® 4L
The M.2 industry standard, mated height of 1.2 mm, 1.4 mm, and 1.7 mm max.,excellent electrical performance up to 12 GHz
- Micro-coaxial Cable (AWG): #35 (0.81) #36 (0.64) #36 (0.81)
- Frequency Range: Up to 12 GHz
- Mated Height (mm): 1.200 Max. , 1.400 Max. , 1.700 Max.
MHF® 4L LK
Locking solution that works with MHF® 4/4L receptacles, mated height of 2.0 mm max., excellent electrical performance up to 12 GHz
- Micro-coaxial Cable (AWG): #30 (1.37)
- Frequency Range: Up to 12 GHz
- Mated Height (mm): 2.000 Max.
MHF® 5
Low-profile (mated height = 1.0 mm max.), supports to 12 GHz
- Micro-coaxial Cable (AWG): #35 (0.81) #36 (0.64) #36 (0.81) #38 (0.48)
- Frequency Range: Up to 12 GHz Up to 6 GHz
- Mated Height (mm): 1.000 Max.
MHF® 5L
Improved electrical performance of 1.6 VSWR through 15 GHz,mated height of 1.3 mm max.
- Micro-coaxial Cable (AWG): #32 (1.13) #33 (0.81)
- Frequency Range: Up to 15 GHz
- Mated Height (mm): 1.300 Max.
MHF® III
Low-profile design (mated height = 1.6 mm max.), supports up to 9 GHz
- Micro-coaxial Cable (AWG): #36 (0.81) #36 (0.64)
- Frequency Range: Up to 9 GHz
- Mated Height (mm): 1.600 Max.
MHF®-TI
Small, robust RF connector for automotive telematics antenna, and camera sensors
- Micro-coaxial Cable (AWG): #24 (3.00) #26 (2.40)
- Frequency Range: Up to 6 GHz
- Mated Height (mm): 3.650 Max.
MHF®-SW23
RF switch connector with a 2.3 x 2.3 mm footprint, supports to 11 GHz.
- Mated Height (mm): 1.350 Max.
MHF®-SW23 PLUG
Micro RF coaxial plug, mates to MHF®-SW23 RF switch PCB receptacle
- Micro-coaxial Cable (AWG): #32 (1.13)
- Frequency Range: DC ~ 9 GHz
- Mated Height (mm): 3.700 Max.
MP-A
Surface mount cable clip and clamp for RF assembly grounding and cable routing
- Mated Height (mm): 1.770 Max. (1.670 Nom.)
CABLINE®-CA IIP PLUS
64 Gbps/lane PAM4, 0.4 mm pitch, horizontal mating type Twinax & micro-coaxial cable assembly
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 60
- Mated Height (mm): 1.300 Max. (1.140 Nom.)
CABLINE®-CAP
64 Gbps PAM4, 0.4 mm pitch, horizontal mating type micro-coaxial cable assembly
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 50
- Micro-coaxial Cable (AWG): Micro-Coaxial (#38)
- Mated Height (mm): 1.350 Max. (1.150 Nom.)
CABLINE®-UY
Low mating height (Height = 0.76 mm), Narrow pitch (0.35 mm pitch), Right angle vertical mating type micro-coaxial cable connector
- Contact Pitch (mm): 0.35 mm
- Available Pin Count: 5, 10
- Mated Height (mm): 0.820 Max. (0.760 Nom.)
CABLINE®-VS II
Fully-shielded with mechanical lock, suitable for high-data-rate transfer (20 Gbps/lane), 0.5 mm pitch, horizontal mating type micro-coaxial connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 20, 30, 40
- Mated Height (mm): 1.200 Max.
CABLINE®-CA II
Fully-shielded with mechanical lock, high-data-rate transfer, 0.4 mm pitch, horizontal mating type micro-coaxial connector
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 20, 30, 40, 50
- Mated Height (mm): 1.100 Max.
CABLINE®-CA II PLUS
Fully-shielded with mechanical lock, High-data-rate transfer, 0.4 mm pitch, Horizontal mating type micro-coaxial connector
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 60
- Mated Height (mm): 1.200 Max.
CABLINE®-UM
Fully-shielded and multi-point ground, Mechanical lock, High-data-rate transfer (20 Gbps/lane), 0.4 mm pitch, Right angle vertical mating type micro-coaxial connector
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 30, 40, 60
- Mated Height (mm): 2.350 Max. (2.200 Nom.)
CABLINE®-CA
High-data-rate transfer, mechanical lock with shielding and multi-point ground, 0.4 mm pitch, Horizontal mating type micro-coaxial connector
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 10, 12, 20, 30, 40, 50, 60
- Mated Height (mm): 1.100 Max. (1.000 Nom.)
CABLINE®-VS
VESA standard connector, Suitable for high-data-rate transfer (20 Gbps/lane), Mechanical locking bar, 0.5 mm pitch, Horizontal mating type micro-coaxial connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 20, 30, 40, 50
- Mated Height (mm): 1.100 Max. (1.000 Nom.)
CABLINE®-CAL
0.4 mm pitch, Horizontal mating type micro-coaxial connector with mechanical lock (mating height: 0.8 mm max)
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 30, 40
- Mated Height (mm): 0.800 Max. (0.700 Nom.)
CABLINE®-UX II
0.25 mm pitch, Right angle vertical mating type Micro-coaxial connector
- Contact Pitch (mm): 0.25 mm
- Available Pin Count: 30, 34, 40, 50
- Mated Height (mm): 1.100 Max. (1.040 Nom.)
CABLINE®-CX II With Cover
0.25 mm pitch, Horizontal mating type Micro-coaxial connector with EMC shielding cover and mechanical lock
- Contact Pitch (mm): 0.25 mm
- Available Pin Count: 40
- Mated Height (mm): 1.000 Max.
CABLINE®-CX II Without Cover
0.25 mm pitch, Horizontal mating type Micro-coaxial connector with mechanical lock (Mating height: 0.73 mm)
- Contact Pitch (mm): 0.25 mm
- Available Pin Count: 40
- Mated Height (mm): 0.780 Max. (0.730 Nom.)
CABLINE®-SS
Narrow depth, robust, right angle vertical mate with max power delivery (AWG#34) In 0.4 mm pitch size and high temperature/humidity (autoclavable) option
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 10, 14, 20, 30, 32, 35, 40, 50
- Mated Height (mm): 1.850 Max. (1.650 Nom.)
CABLINE®-UA II
0.3 mm pitch, Right angle vertical mating type Micro-coaxial connector
- Contact Pitch (mm): 0.30 mm
- Available Pin Count: 26, 32, 40, 50
- Mated Height (mm): 1.370 Max. (1.270 Nom.)
CABLINE®-CBL
0.4 mm pitch, Horizontal mating type Micro-coaxial connector with mechanical lock (mating height: 0.825 mm)
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 30, 40
- Mated Height (mm): 0.975 Max. (0.825 Nom.)
CABLINE® V
Narrow depth & width with friction lock, USB 3.1 (5 Gbps/lane), Durable to contamination, 0.4 mm pitch, Horizontal mating type micro-coaxial connector
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 10, 15, 20, 25, 30, 35, 40
- Mated Height (mm): 1.150 Max. (1.000 Nom.)
FPL™ II
Max power delivery (AWG #32), eDP HBR2 (5.4 Gbps/lane), Durable to noise, 0.5 mm pitch, Vertical mating type micro-coaxial connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 30, 40, 50
- Mated Height (mm): 2.400 Max. (2.200 Nom.)
ISH® (Horizontal Type)
High heat and vibration resistant, horizontal, SMT connector
- Contact Pitch (mm): 2.00 mm
- Available Pin Count: 3, 6, 8, 12, 16, 20, 32
ISH® (Vertical Type)
High heat and vibration resistant, vertical SMT connector
- Contact Pitch (mm): 2.00 mm
- Available Pin Count: 8, 10, 20, 26
ISH® (Horizontal Type-Hybrid)
High heat and vibration resistant connector with hybrid (signal + power) terminals
- Contact Pitch (mm): 2.00 mm
- Available Pin Count: 20, 28
ISH® (Wire-to-Wire Type)
High heat and vibration resistance, wire-to-wire relay connector
- Contact Pitch (mm): 2.00 mm
- Available Pin Count: 3, 8
IARPB® (Horizontal Type)
Vibration resistant, one-piece,horizontal type board-in connector
- Contact Pitch (mm): 2.50 mm
- Available Pin Count: 2, 3, 4, 5, 6
- Mated Height (mm): 3.800 Max.
IARPB® (Vertical Type)
Vibration resistant, one-piece,vertical type board-in connector
- Contact Pitch (mm): 2.50 mm
- Available Pin Count: 2, 4, 5, 6, 7
- Mated Height (mm): 8.400 Max.
ISFIT® (Press-Fit Terminal)
Wire-to-board/board-to-board, 4-points spring contact press-fit terminal
NOVASTACK® 35-HDH
1.5 mm height, 0.35 mm pitch , Fully-shielded and high-profile design, High-speed 20 GHz (≒40 Gbps)/lane transmission
- Contact Pitch (mm): 0.35 mm
- Available Pin Count: 60, 70
- Mated Height (mm): 1.600 Max. (1.500 Nom.)
NOVASTACK® 35-HDN
Fully-shielded and narrow design, Good performance for RF transmission, Power supply is available with Corson Alloy contact, 0.35 mm pitch, 0.7mm height
- Contact Pitch (mm): 0.35 mm
- Available Pin Count: 10, 20, 30
- Frequency Range: Up to 15 GHz
- Mated Height (mm): 0.750 Max. (0.700 Nom.)
NOVASTACK® 35-HDP
High-speed (20+ Gbps/lane) fully-shielded with power contacts, 0.35 mm pitch, 0.7 mm height
- Contact Pitch (mm): 0.35 mm
- Available Pin Count: 16, 28, 34, 42, 56, 62
- Mated Height (mm): 0.750 Max. (0.700 Nom.)
NOVASTACK® 35-PH
1.5 mm height connector with long effective contact wipe length, power contacts, 0.35 mm pitch, vertical mating
- Contact Pitch (mm): 0.35 mm
- Available Pin Count: 10, 30, 40, 50
- Mated Height (mm): 1.560 Max. (1.500 Nom.)
NOVASTACK® 35-P
Robust connector with hold-down feature and Corson Alloy main contacts to transmit power lines, 0.35 mm pitch, 0.7 mm height, 2.3 mm depth
- Contact Pitch (mm): 0.35 mm
- Available Pin Count: 10, 14, 18, 20, 24, 30, 34, 40, 50, 60
- Mated Height (mm): 0.800 Max. (0.700 Nom.)
NOVASTACK®-B
Supports high power delivery, robust design, 0.4 mm pitch, 0.6 mm height, 2.6 mm depth
- Contact Pitch (mm): 0.40 mm 1.70 mm
- Available Pin Count: 4
- Mated Height (mm): 0.700 Max. (0.600 Nom.)
EVAFLEX® 5-HD
Fully-shielded, high-speed, auto-locking, horizontal mate, 0.5 mm pitch shielded FFC/FPC connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 24
- Mated Height (mm): 2.200 Max. (2.000 Nom.)
EVAFLEX® 5-SE-G HT
One-handed auto-locking feature, high temperature (125℃), high-speed, horizontal mate, 0.5 mm pitch shielded FFC/FPC connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 30, 50
- Mated Height (mm): 3.750 Max. (3.650 Nom.)
EVAFLEX® 5-SE-G VT
One-handed auto-locking feature, high temperature (125℃), high-speed, vertical mate, 0.5 mm pitch shielded FFC/FPC connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 20, 30, 40, 50, 60
- Mated Height (mm): 6.700 Max. (6.600 Nom.)
EVAFLEX® 5-VS
Auto-locking, high temperature option (105℃), high-speed, horizontal mate, 0.5 mm pitch shielded FFC/FPC connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 10, 15, 20, 24, 30, 40, 50
- Mated Height (mm): 2.000 Max. (1.900 Nom.)
EVAFLEX® 5-SE
Auto-locking, horizontal mate, 0.5 mm pitch FFC/FPC connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 10, 15, 22, 30, 40, 45, 50, 60
- Mated Height (mm): 2.700 Max. (2.400 Nom.)
EVAFLEX® 5-SE VT
Auto-locking, vertical mate, 0.5 mm pitch FFC/FPC connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 16, 22, 24, 26, 30, 40, 45, 50, 60, 80
- Mated Height (mm): 6.300 Max. (6.000 Nom.)
MINIFLEX® 175-ST
Super low profile (height = 0.52 mm), 0.175 mm pitch, horizontal mate, backflip
- Contact Pitch (mm): 0.18 mm
- Available Pin Count: 16, 19
- Mated Height (mm): 0.570 Max. (0.520 Nom.)
MINIFLEX® 2-BF
0.2 mm pitch, Horizontal mating, Backflip, (Height = 0.9 mm)
- Contact Pitch (mm): 0.20 mm
- Available Pin Count: 80, 100, 120
- Mated Height (mm): 1.000 Max. (0.900 Nom.)
MINIFLEX® 3-BFN
Low profile (Height = 0.9 mm), 0.3 mm pitch, horizontal mating, backflip
- Contact Pitch (mm): 0.30 mm
- Available Pin Count: 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 45, 49, 51, 55, 57, 61, 65
- Mated Height (mm): 1.000 Max. (0.900 Nom.)
MINIFLEX® 3-BFNH
Improved retention force, footprint compatibility, 0.3 mm pitch, horizontal
- Contact Pitch (mm): 0.30 mm
- Available Pin Count: 7, 9, 11, 21, 23, 25, 31, 33, 35, 39, 41, 45, 51, 61, 71
- Mated Height (mm): 1.000 Max. (0.900 Nom.)
MINIFLEX® 3-BFNH L-HD
Improved retention force, robust design with hold-down feature, long actuator, low profile (height = 0.9 mm), 0.3 mm pitch, horizontal, backflip
- Contact Pitch (mm): 0.30 mm
- Available Pin Count: 39, 61
- Mated Height (mm): 1.000 Max. (0.900 Nom.)
MINIFLEX® 3-BFN LK
0.3 mm pitch, Horizontal mating, Backflip, Mechanical lock, (Height = 0.9 mm)
- Contact Pitch (mm): 0.30 mm
- Available Pin Count: 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 51, 53, 57, 61, 71
- Mated Height (mm): 1.000 Max. (0.900 Nom.)
MINIFLEX® 3-BFN L-HD
Robust design with hold-down feature, long actuator, low profile (Height = 0.9 mm), 0.3 mm pitch, horizontal, backflip
- Contact Pitch (mm): 0.30 mm
- Available Pin Count: 51
- Mated Height (mm): 1.000 Max. (0.900 Nom.)
MINIFLEX® 3-BFN L-LK-HD
Mechanical lock, robust design with hold-down feature, long actuator, low profile (Height = 0.9 mm) 0.3 mm pitch, horizontal, backflip
- Contact Pitch (mm): 0.30 mm
- Available Pin Count: 11, 40, 45
- Mated Height (mm): 1.000 Max. (0.900 Nom.)
MINIFLEX® 4-ST
Super low profile (height = 0.5 mm), 0.4 mm pitch, horizontal mating, backflip
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 4, 6, 8, 10, 12
- Mated Height (mm): 0.550 Max. (0.500 Nom.)
MINIFLEX® 5-BFN II
Robust design with hold-down feature, low profile (height = 1.0 mm), 0.5 mm pitch, horizontal, backflip
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 40, 50, 54
- Mated Height (mm): 1.100 Max. (1.000 Nom.)
MINIFLEX® 5-BFN II LK
Mechanical lock, robust design with hold-down feature, low profile (height = 1.0 mm), 0.5 mm pitch, horizontal, backflip
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 4, 6, 8, 10, 12, 14, 16, 18, 20, 24
- Mated Height (mm): 1.100 Max. (1.000 Nom.)
DW-5
Hybrid connector for discrete wire and FPC, height = 1.0 mm, 0.5 mm pitch, horizontal, backflip
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 6, 8, 10
- Mated Height (mm): 1.100 Max. (1.000 Nom.)
MINIFLEX® 5-FF
Robust design with hold down feature, height = 2.55 mm, 0.5 mm pitch, horizontal, front flip
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 20, 30, 40, 50, 55, 60, 64, 68
- Mated Height (mm): 2.750 Max. (2.550 Nom.)
CABLINE®-VS IIF
Fully-shielded with multi-point ground and mechanical lock, 0.5 mm pitch, Horizontal mating type FPC plug connector
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 30, 40
- Mated Height (mm): 1.200 Max.
CABLINE®-VSF
0.5 mm Pitch, Horizontal Mating Type FPC Plug Connector with Mechanical Lock
- Contact Pitch (mm): 0.50 mm
- Available Pin Count: 30, 40
- Mated Height (mm): 1.100 Max. (1.000 Nom.)
CABLINE®-CA IIF
Fully-shielded with multi-point ground and mechanical lock, 0.4 mm pitch, horizontal mating type FPC plug connector
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 30, 40, 50
- Mated Height (mm): 1.100 Max.
CABLINE®-CAF
0.4 mm Pitch, Horizontal Mating Type FPC Plug Connector with Mechanical Lock
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 40, 60
- Mated Height (mm): 1.100 Max. (1.000 Nom.)
CABLINE®-CA IIF PLUS
Fully-shielded with multi-point ground and mechanical lock, 0.4 mm pitch, Horizontal mating type FPC plug connector
- Contact Pitch (mm): 0.40 mm
- Available Pin Count: 60
- Mated Height (mm): 1.200 Max. (0.000 Nom.)
MINIDOCK™ SLIM
Robust high-pin-count docking I/O connector
- Contact Pitch (mm): 0.64 mm
- Available Pin Count: 80, 160
MINIDOCK™ STANDARD
Robust high-pin-count docking I/O connector
- Contact Pitch (mm): 0.64 mm
- Available Pin Count: 100, 200, 240
ES-Gripper® (Assembly Robot End Effector)
Equipped with the electrostatic torque sensor, ESTORQ®, ES-Gripper® is optimized for mating connectors and auto-adjusting for precise insertion alignment in robotics assembly
