Add to My List
  1. Home
  2. Products
  3. Micro-Coaxial/Twinax Connectors
  4. CABLINE®-CA II PLUS

CABLINE®-CA II PLUS

CABLINE-CA II PLUS Product Image
Fully-shielded with mechanical lock, Suitable for high-data-rate transfer (32 Gbps/lane), 0.4 mm pitch, Horizontal mating type micro-coaxial connector

  • ZenShield® fully-shielded with multi-point grounds is ideal for EMC solutions

  • Mechanical locking cover prevents incomplete mating and back-out/unmating

  • High-data-rate transfer, ideal for 32 Gbps/lane applications

*For higher data rate up to 64 Gbps PAM4, please review CABLINE®-CA IIP PLUS that mates to current CABLINE-CA II PLUS receptacle (20790-060E-01/-02).
Contact Pitch (mm):
0.400
Height:
1.20 Max
Available Pin Count:
60
Micro-Coaxial Cable (AWG):
#38 #40 #42 #44 #46
Twinax Cable (AWG):
#40 #42
Discrete Cable (AWG):
#34 #36 #38 #39 #40 #42 #44 #46
Mating Direction:
Horizontal

Downloads

ZenShield® fully-shielded with multi-point grounds is ideal for EMC solutions
    General Connector ZenShield® Connector
CABLINE-CA_II_PLUS_FAB1-1.jpg CABLINE-CA_II_PLUS_FAB1-2.jpg
1. Grounding path 
 CABLINE-CA_II_PLUS_FAB1-3.jpg CABLINE-CA_II_PLUS_FAB1-4.jpg
Connectors can be placed closer to antenna
View From Back
CABLINE-VS_II_FAB1-5.jpgSoldered contacts
1. Wi-Fi Antenna
 
CABLINE-VS_II_FAB1-6.jpgMechanical contact
2. High-data-rate Signal Transfer

 

Mechanical locking cover prevents incomplete mating and back-out/unmating
CABLINE-CA_II_PLUS_FAB2-1.jpg
Mate 
 CABLINE-CA_II_PLUS_FAB2-2.jpg
 Locked
 CABLINE-CA_II_PLUS_FAB2-3.jpg
Unable to lock Can only be locked when mating is complete
CABLINE-CA_II_PLUS_FAB2-4.jpg
incomplete mating
 CABLINE-CA_II_PLUS_FAB2-5.jpg
complete mating

 

High-data-rate transfer, ideal for 32 Gbps/lane applications

Measurement results

Connector: CABLINE®-CA II 40P

Cable: Micro-coaxial cable 
AWG #40, 45ohm,
Length: 100 mm

Pin Assignment: GSSGSSG

 CABLINE-CA_II_PLUS_FAB3.png
 
Contact pitch
0.400 mm
Height
1.20 Max
Depth
6.70 mm
Width Formula
6.95+(0.4*?p) mm
Pin count
60
Current rating
0.1A AC/DC [AWG #44] per contact/up to 60 contacts 0.24A AC/DC [AWG #42] per contact/up to 60 contacts 0.3A AC/DC [AWG #40] per contact/up to 60 contacts 0.5A AC/DC [AWG #38] per contact/up to 18 contacts 0.8A AC/DC [AWG #36] per contact/up to 6 contacts 1.0A AC/DC [AWG #34] per contact/up to 6 contacts
Applicable Standards (Reference Only)
USB4 (20 Gbps/lane) Thunderbolt 4(20Gbps/Lane） USB 3.1 Gen 2 (10 Gbps) USB 3.1 Gen 1 (5 Gbps) eDP HBR 3 (8.1 Gbps) eDP HBR 2 (5.4 Gbps) eDP (2.7 Gbps) HDMI 2.0 (6 Gbps) V-By-One HS 1.4 (4 Gbps) MiPi standards
Full shielding (ZenShield®)
Yes

RECOMMENDED PART NUMBERS

Please contact us if you cannot find the needed part number(s) from the list below.

 

DIAGRAMS_CABLINE-CA_II_PLUS

 

CABLINE-CA II PLUS RECOMMENDED PART NUMBERS

Part Number Description Part Number
CABLINE-CA II PLUS plug cable assembly 60pin 20788-060T-01
CABLINE-CA II PLUS plug housing 60pin 20680-060T-01
CABLINE-CA II PLUS plug shell 60pin 3204-0601
CABLINE-CA II PLUS plug lock bar 60pin 20789-060T-01
CABLINE-CA II PLUS receptacle 60pin 20790-060E-02

 

SAMPLE HARNESS FOR EVALUATION

Part Number Description Part Number
CABLINE-CA II PLUS HARNESS L=200mm 60pin 81674-100B-02-D

SI Test Board with 2.92mm Adapter

Part Number Description Part Number
SI Test Board for CABLINE-CA II PLUS 60pin 91548-060B-001