1. Home
  2. Search by Application
  3. Drone

Drone

    DRONE MAIN BODY
  • Antenna Connection
  • Main Processing Unit
  • Gimbal Motor Connection - Motherboard
  • Gimbal Motor Connection - Camera
  • Camera Connection - Body
  • Camera Connection - Camera image sensor board
  • Sensor - Motherboard
  • Sensor
DRONE MAIN BODY
    DRONE CONTROLLER
  • Antenna Connection
  • LCD PANEL Connection
DRONE CONTROLLER
Antenna Connection
MHF® I LK
Locking solution that works with MHF I receptacles, supports up to 9 GHz, mated height of 2.9 mm max
  • MICRO-COAX
MHF® 4L LK
Locking solution that works with MHF® 4/4L receptacles, mated height of 2.0 mm max., excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 4L
The M.2 industry standard, mated height of 1.2 mm, 1.4 mm, and 1.7 mm max.,excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 4L (1.4 mm height)
The M.2 industry standard, mated height of 1.4 mm max., excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 4L (1.7 mm height)
The M.2 industry standard, mated height of 1.7 mm max., excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 5
Low-profile (mated height = 1.0 mm max.), supports to 12 GHz
  • MICRO-COAX
MHF®-SW23
RF switch connector with a 2.3 x 2.3 mm footprint, supports to 11 GHz.
  • RF SWITCH
CABLINE®-UY
Low mating height (Height = 0.76 mm), Narrow pitch (0.35 mm pitch), Right angle vertical mating type micro-coaxial cable connector
  • MICRO-COAX
  • FPC
Main Processing Unit
NOVASTACK® 35-P
Robust connector with hold-down feature and Corson Alloy main contacts to transmit power lines, 0.35 mm pitch, 0.7 mm height, 2.3 mm depth
  • BOARD TO BOARD
  • POWER PIN
MINIFLEX® 3-BFN L-LK-HD
Mechanical lock, robust design with hold-down feature, long actuator, low profile (Height = 0.9 mm) 0.3 mm pitch, horizontal, backflip
  • FPC
MINIFLEX® 5-BFN II LK
Mechanical lock, robust design with hold-down feature, low profile (height = 1.0 mm), 0.5 mm pitch, horizontal, backflip
  • FPC
  • FFC
Gimbal Motor Connection - Motherboard
CABLINE®-UX II
0.25 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
MINIFLEX® 3-BFN LK
0.3 mm pitch, Horizontal mating, Backflip, Mechanical lock, (Height = 0.9 mm)
  • FPC
MINIFLEX® 5-BFN II LK
Mechanical lock, robust design with hold-down feature, low profile (height = 1.0 mm), 0.5 mm pitch, horizontal, backflip
  • FPC
  • FFC
Gimbal Motor Connection - Camera
CABLINE®-UY
Low mating height (Height = 0.76 mm), Narrow pitch (0.35 mm pitch), Right angle vertical mating type micro-coaxial cable connector
  • MICRO-COAX
  • FPC
CABLINE®-UX II
0.25 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-CA
High-data-rate transfer, mechanical lock with shielding and multi-point ground, 0.4 mm pitch, Horizontal mating type micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-UM
Fully-shielded and multi-point ground, Mechanical lock, High-data-rate transfer (40 Gbps/lane PAM3), 0.4 mm pitch, Right angle vertical mating type micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-CAL
0.4 mm pitch, Horizontal mating type micro-coaxial connector with mechanical lock (mating height: 0.8 mm max)
  • MICRO-COAX
  • DISCRETE WIRE
Camera Connection - Body
CABLINE®-UX II
0.25 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-UA II
0.3 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-CAL
0.4 mm pitch, Horizontal mating type micro-coaxial connector with mechanical lock (mating height: 0.8 mm max)
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-UM
Fully-shielded and multi-point ground, Mechanical lock, High-data-rate transfer (40 Gbps/lane PAM3), 0.4 mm pitch, Right angle vertical mating type micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
Camera Connection - Camera image sensor board
CABLINE®-UX II
0.25 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-UA II
0.3 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-CAL
0.4 mm pitch, Horizontal mating type micro-coaxial connector with mechanical lock (mating height: 0.8 mm max)
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-UM
Fully-shielded and multi-point ground, Mechanical lock, High-data-rate transfer (40 Gbps/lane PAM3), 0.4 mm pitch, Right angle vertical mating type micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
Sensor - Motherboard
NOVASTACK® 35-P
Robust connector with hold-down feature and Corson Alloy main contacts to transmit power lines, 0.35 mm pitch, 0.7 mm height, 2.3 mm depth
  • BOARD TO BOARD
  • POWER PIN
MINIFLEX® 3-BFN L-LK-HD
Mechanical lock, robust design with hold-down feature, long actuator, low profile (Height = 0.9 mm) 0.3 mm pitch, horizontal, backflip
  • FPC
MINIFLEX® 5-BFN II LK
Mechanical lock, robust design with hold-down feature, low profile (height = 1.0 mm), 0.5 mm pitch, horizontal, backflip
  • FPC
  • FFC
Sensor
NOVASTACK® 35-P
Robust connector with hold-down feature and Corson Alloy main contacts to transmit power lines, 0.35 mm pitch, 0.7 mm height, 2.3 mm depth
  • BOARD TO BOARD
  • POWER PIN
MINIFLEX® 3-BFN L-LK-HD
Mechanical lock, robust design with hold-down feature, long actuator, low profile (Height = 0.9 mm) 0.3 mm pitch, horizontal, backflip
  • FPC
MINIFLEX® 5-BFN II LK
Mechanical lock, robust design with hold-down feature, low profile (height = 1.0 mm), 0.5 mm pitch, horizontal, backflip
  • FPC
  • FFC
Antenna Connection
MHF® I LK
Locking solution that works with MHF I receptacles, supports up to 9 GHz, mated height of 2.9 mm max
  • MICRO-COAX
MHF® 4L LK
Locking solution that works with MHF® 4/4L receptacles, mated height of 2.0 mm max., excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 4L
The M.2 industry standard, mated height of 1.2 mm, 1.4 mm, and 1.7 mm max.,excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 4L (1.4 mm height)
The M.2 industry standard, mated height of 1.4 mm max., excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 4L (1.7 mm height)
The M.2 industry standard, mated height of 1.7 mm max., excellent electrical performance up to 12 GHz
  • MICRO-COAX
MHF® 5
Low-profile (mated height = 1.0 mm max.), supports to 12 GHz
  • MICRO-COAX
CABLINE®-UY
Low mating height (Height = 0.76 mm), Narrow pitch (0.35 mm pitch), Right angle vertical mating type micro-coaxial cable connector
  • MICRO-COAX
  • FPC
LCD PANEL Connection
CABLINE®-UX II
0.25 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-UA II
0.3 mm pitch, Right angle vertical mating type Micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-UM
Fully-shielded and multi-point ground, Mechanical lock, High-data-rate transfer (40 Gbps/lane PAM3), 0.4 mm pitch, Right angle vertical mating type micro-coaxial connector
  • MICRO-COAX
  • DISCRETE WIRE
CABLINE®-CAL
0.4 mm pitch, Horizontal mating type micro-coaxial connector with mechanical lock (mating height: 0.8 mm max)
  • MICRO-COAX
  • DISCRETE WIRE

Related Topics

MHF® LK Series / Micro RF Coaxial Connector with locking function

Locking solution that works with Micro RF connector, MHF
MHF LK Series

CABLINE®-UM / Micro-Coaxial Wire-to-Board Connector

0.4 mm pitch, right angle vertical mating type, micro-coaxial cable connector with EMI shielding design (optional mechanical lock)
CABLINE-UM

Micro-Coaxial Cable Assembly Capabilities

Featuring mechanical and signal transmission benefits and advantages of Micro-Coaxial Cable Assemblies. These assemblies are capable of handling high data rates, while providing high degree of flexibility and high shielding performance.
Micro-Coaxial

FrSky Electronic selects I-PEX MHF® RF connectors for its transmitters and receivers

FrSky Electronic is focused on the R&D, production and sales of electronic products and embedded software in the areas of remote-control and intelligent control systems. The main product lines include transmitters, receivers, modules, flight controllers, sensors, and related embedded software. I-PEX MHF® I and MHF® 4 RF connectors are used in almost all transmitters and receivers developed and produced by FrSky.
20210727_FRSKY_I-PEX-RF-connector.png

Drones: A Source of Inspiration

In recent years, drone racing has generated great excitement all over the world by creating a world drone champions league. In Japan, there is also a professional drone racing team, DMM RAIDEN RACING, that competes with other teams around the world. The I-PEX® MHF® I LK Micro RF Coaxial Connector is used in their drone. We interviewed Junichi Goto, captain of DMM RAIDEN RACING, and Tetsuya Tagawa, I-PEX Connectors engineer and MHF I LK Development Team Leader, about the background of the MHF I LK in drones.
Drone Article Thumbnail

Connector Locking Features

Connectors with locking functions can strengthen the mating retention force, which helps prevent disengagement of the connection. There are various types of locking methods for connectors.
20211005_Connector_Locking_Features.png

Hinge Component Pass-Through with CABLINE® Harness Assemblies

In recent years, device makers are paying much more attention to slimmer designs,  which requires more innovative ideas to fit components in these much smaller spaces. The CABLINE® series harness assemblies are not only capable of transmitting high-speed signals, but they can also be threaded through hinge components in a limited space.
20210531_hinge-component.png

Common design concept for connectors

The I-PEX connector product lineup includes a series of connectors that employ a common design concept with multiple connection options. For PCB module products that are versatile for a variety of electronic devices, adopting a connector with a common design concept allows for the selection of multiple connection methods. As the number of PCB module connection method options increases, the markets for devices that can be targeted will also expand.　I-PEX proposes to use the common design connectors with wide range of connection method options, especially when developing highly versatile modules.
20210216_common-design-thumbnail.jpg

I-PEX ZenShield® connectors are recommended for signal transmission from camera module using MIPI

Notebook PCs and tablets, which are densely populated with various electronic components, antennas are often mounted nearby, and MIPI signals may adversely affect the antennas. Therefore, EMC measures are very effective to prevent signal interference between them. The I-PEX ZenShield® connector series can provide excellent EMC countermeasures.
20220304_MIPI_simple.png

ZenShield®: High-Performance EMC Shielding Connectors

ZenShield® is the brand name for the I-PEX small connector series having high-performance EMC shielding design. ZenShield® gives board designers more flexibility for designing the board by allowing the connectors to be placed in close proximity to sensitive subsystems, such as transmit/receive antennas, that are commonly found in high-performance wireless communication systems.
ZenShield