Add to My List
  1. Home
  2. Products
  3. Micro-Coaxial/Twinax Connectors
  4. CABLINE®-UM

CABLINE®-UM

CABLINE-UM
Fully-shielded and multi-point ground, Mechanical lock, High-data-rate transfer (20 Gbps/lane), 0.4 mm pitch, Right angle vertical mating type micro-coaxial connector

  • ZenShield® fully-shielded with multi-point grounds to prevent EMI leakage

  • Wide range of variations

  • High contact reliability

Contact Pitch (mm):
0.400
Height:
2.35 Max (2.20 Nom.)
Available Pin Count:
30 40 60
Micro-Coaxial Cable (AWG):
#38 #40 #42 #44 #46
Twinax Cable (AWG):
#40 #42
Discrete Cable (AWG):
#34 #36 #38 #39 #40 #42 #44 #46
Mating Direction:
Vertical

Downloads

ZenShield® fully-shielded with multi-point grounds to prevent EMI leakage
    General Connector ZenShield® Connector
CABLINE-UM_FAB1-1.jpg
View From Underside 
 
 CABLINE-UM_FAB1-3.jpg CABLINE-UM_FAB1-4.jpg
★Signal Jumper Connection
（Example of electromagnetic noise source）
CABLINE-UM_FAB1-2.jpgGround SMT points
 
1. Antenna  2. EMI
 
 
ZenShield® connector allow closer placement to antenna or radiating structures

 

Wide range of variations
With Lock Cover---Enhanced mating retention force With Pull tape holder---Improve unplug efficiency
CABLINE-UM_FAB2-1.jpg CABLINE-UM_FAB2-3.jpg
Without Lock Cover‐‐‐Low profile
CABLINE-UM_FAB2-2.jpg

 

 

High contact reliability
CABLINE-UM_FAB3.jpg

★Wiping length: 0.65 mm min.

 
 
Contact pitch
0.400 mm
Height
2.35 Max (2.20 Nom.)
Depth
5.00 mm
Width Formula
With Lock Cover : 5.0 + (0.4 * ?p); Without Lock Cover : 4.2 + (0.4 * ?p) mm
Pin count
30 40 60
Current rating
0.1A AC/DC [AWG #44] Per Contact 0.24A AC/DC [AWG #42] Per Contact 0.3A AC/DC [AWG #40] Per Contact 0.5A AC/DC [AWG #38] Per Contact 0.8A AC/DC [AWG #36] Per Contact 1.0A AC/DC [AWG #34] Per Contact
Applicable Standards (Reference Only)
USB4 (20 Gbps/lane) USB 3.1 Gen 2 (10 Gbps) USB 3.1 Gen 1 (5 Gbps) eDP HBR 3 (8.1 Gbps) eDP HBR 2 (5.4 Gbps) eDP (2.7 Gbps) HDMI 2.0 (6 Gbps) V-By-One HS 1.4 (4 Gbps) MiPi standards
Full shielding (ZenShield®)
Yes

RECOMMENDED PART NUMBERS

Please contact us if you cannot find the needed part number(s) from the list below.

 

DIAGRAMS_CABLINE-UM

 

CABLINE-UM RECOMMENDED PART NUMBERS

Part Number Description Part Number
CABLINE-UM plug cable assembly 30pin 20877-030T-01
CABLINE-UM plug cable assembly 40pin 20877-040T-01
CABLINE-UM plug cable assembly 50pin 20877-050T-01
CABLINE-UM plug cable assembly 60pin 20877-060T-01
CABLINE-UM plug housing 30pin 20878-030T-01
CABLINE-UM plug housing 40pin 20878-040T-01
CABLINE-UM plug housing 60pin 20878-060T-01
CABLINE-UM plug shell 30pin 3488-0301
CABLINE-UM plug shell 40pin 3488-0401
CABLINE-UM plug shell 50pin 3488-0501
CABLINE-UM plug shell 60pin 3488-0601
CABLINE-UM plug lock cover 30pin 3493-0301
CABLINE-UM plug lock cover 40pin 3493-0401
CABLINE-UM plug lock cover 50pin 3493-0501
CABLINE-UM plug lock cover 60pin 3493-0601
CABLINE-UM plug pull tape holder 30pin 3588-0301
CABLINE-UM plug pull tape holder 40pin 3588-0401
CABLINE-UM plug pull tape holder 50pin 3588-0501
CABLINE-UM plug pull tape holder 60pin 3588-0601
CABLINE-UM receptacle 30pin 20879-030E-01
CABLINE-UM receptacle 40pin 20879-040E-01
CABLINE-UM receptacle 50pin 20879-050E-01
CABLINE-UM receptacle 60pin 20879-060E-01

 

SAMPLE HARNESS FOR EVALUATION

Part Number Description Part Number
CABLINE-UM harness 30pin micro-coaxial 40AWG L=100mm 82187-100B-02-D
CABLINE-UM harness 30pin micro-coaxial 40AWG L=200mm 81465-100B-02-D
CABLINE-UM harness 30pin micro-coaxial 40AWG L=300mm 82286-100B-02-D
CABLINE-UM harness 40pin micro-coaxial 40AWG L=200mm 81466-100B-02-D
CABLINE-UM harness 60pin micro-coaxial 40AWG L=200mm 82147-100B-02-D

 

SI Test Board with 2.92mm Adapter

Part Number Description Part Number
SI Test Board for CABLINE-UM 30pin 91580-030B-001
SI Test Board for CABLINE-UM 40pin 91580-040B-001
SI Test Board for CABLINE-UM 60pin 91580-060B-001